Machine Structure and Maintenance

• Introduction to the overall machine structure
• Replacement of water tank cooling water, cleaning of dust screens, replacement and cleaning of filters
• Maintenance of the crossbeam
• Maintenance of the limit positions of each axis
• Cleaning of the guide rails and gear racks
• Refueling methods and setting methods of the fuel tank (types of each oil)
• Daily cleaning of the equipment appearance
• Cleaning of the air-conditioner dust screen
• Oil application and cleaning of the exchange table chain (for machines with exchange tables)

Accessories and Safety

• Introduction to the official mall and how to purchase accessories
• Understanding of laser safety protection knowledge
• Understanding of equipment personal safety

Principle and Operation

• Introduction to the laser emission principle
• Switching on and off the machine in sequence
• Functions of each button and key on the operation console
• Introduction to the functions of each software
• Installation of the cutting software, setting, backup and screenshot of the platform configuration
• Introduction to each key on the hand-held operation box

Cutting Steps

• Finding and adjusting the focal point
• Calibration method of the height adjuster
• Adjusting the laser to be concentric with the gas nozzle
• Setting of the water tank temperature control (summer and winter temperatures)
• Methods of replacing and cleaning the protective lens
• Replacing the copper nozzle and the selection of the copper nozzle
• Replacing the ceramic ring

Cutting Process

• Common-edge cutting
• Differences, advantages, and disadvantages of blowing air, oxygen, and nitrogen
• Methods of rounding corners to avoid burning corners during oxygen cutting
• Understanding of cutting process parameters
• Debugging methods of various plate parameter processes (focus on practice)
• Saving and reading of various plate parameter processes

Other Precautions

• Use of the software for viewing laser alarm information
• After shutting down, drain the water completely if the local temperature is below zero degrees, or use a temperature-controlled heating tube with antifreeze to prevent damage from frozen water
• Methods of using a frequency-doubling plate to check the light spot and photographic paper detection
• Handle materials gently when loading them onto the exchange table (for machines with exchange tables)
• Strictly avoid putting hands or body into the machine’s working and moving area during operation
• Keep the wooden box of the laser and the carton of the cutting head safe

Machine Structure and Maintenance

• Introduction to the overall machine structure
• Replacement of water tank cooling water, cleaning of dust screens, replacement and cleaning of filters
• Maintenance of the front and rear chucks
• Limit positions and maintenance of the x, y, z follow-up axes and cylinders
• Cleaning of the guide rails and gear racks
• Refueling methods and setting methods of the fuel tank (types of each oil)
• Cleaning of the air-conditioner dust screen and daily cleaning of the equipment appearance

Accessories and Safety

• Introduction to the official mall and how to purchase accessories
• Adjustment of the chuck air pressure and oil quantity
• Understanding of laser safety protection knowledge

Principle and Operation

• Switching on and off the machine in sequence
• Functions of each button and key on the operation console
• Introduction to the functions of the cutting software and nesting software
• Installation of the cutting software, setting, backup, and screenshot of the platform configuration
• Introduction to each key on the hand-held operation box

Cutting Steps

• Finding and adjusting the focal point
• Advantages and disadvantages of B-axis calibration
• Capacitance calibration
• Centering methods for various pipes
• Calibration methods for common axes (opposite-clamping, follow-up) and calibration for the blanking axis
• Use method of the rear chuck air blowing
• Adjusting the laser to be concentric with the gas nozzle
• Setting of the water tank temperature control (summer and winter temperatures)
• Methods of replacing and cleaning the protective lens
• Replacing the copper nozzle and selecting the copper nozzle
• Replacing the ceramic ring

Cutting Process

• Cutting methods for channel steel, angle steel, and I-beam (pulling the normal vector)
• Differences, advantages, and disadvantages of blowing air, oxygen, and nitrogen
• Influence of pipe bending on cutting accuracy and remedial methods
• Use of the chuck jaws
• Understanding of cutting process parameters
• Debugging methods for various plate parameter processes (focus on practice)
• Saving and reading of various plate parameter processes

Other Precautions

• After shutting down, drain the water completely if the local ambient temperature is below zero degrees, or use a temperature-controlled heating tube with antifreeze to prevent frozen water damage
• Advantages and disadvantages of the avoidance function
• Handle pipes gently when loading them to avoid hitting the chuck and affecting accuracy
• Use the software for viewing laser alarm information
• Methods for using a frequency-doubling plate to check the light spot and photographic paper detection
• Strictly avoid putting hands or body into the machine’s working and moving area during operation

• On-site training at your facility.
• Live online sessions with Q&A.
• Self-paced video tutorials with lifetime access.