• BOCI BLT6 Series High Power Laser Cutting Head
  • BOCI BLT6 High Power Laser Cutting Head
  • BOCI BLT6 Series High Power Laser Head
  • BOCI BLT6 High Power Laser Head
  • BOCI High Power BLT6 Laser Head
  • BOCI High Power BLT6 Laser Head for Fiber laser cutting machine
  • BOCI High Power BLT6 Laser Head for Fiber laser cutter
  • BOCI High Power BLT6 Laser Head for Fiber laser cutting
  • BOCI BLT6 Laser Head for Fiber laser cutting machine
  • BOCI BLT6 Laser Head for laser cutting machine

BOCI BLT6 Series High Power Laser Cutting Head

BOCI BLT6 Series High Power Laser Cutting Head

Model
Size
  • Cooperated with 30+ Brands​ (RAYCUS, BOCHU, MAX, WSX, etc)
  • 100% Original, Brand New & Latest Models
  • Fast Support with 2-Hour Response, 24/7
  • 15 Global Service Hubs with Fully Stocked Ventory
  • Local Support Teams​ across the USA, Germany, Italy, Turkry, Brazil and more.

The BOCI BLT6 Series smart laser cutting heads exemplify modern engineering, designed for ultra-high power laser systems with a maximum output of 40kW. Featuring an innovative beam path design and enhanced optical lenses, these cutting heads establish a new benchmark in performance, providing consistent cutting, uncomplicated installation and setup, and dual dust protection. Equipped with smart piercing and Auto Recut, they adeptly satisfy the rigorous requirements of both air and N2 high-power cutting, markedly enhancing efficiency and yield.

Technical Data at a Glance

Model BLT642H BLT662H BLT682H BLT6102H
Power ≤15kW ≤20kW ≤30kW ≤40kW
Fiber Interface Q+, QD, QBH, ADD Q+, QD, QBH, ADD Q+, QD, QBH, ADD Q+, QD, ADD
Focusing Focal Length (mm) 200 200 200 / 300 300
Collimating Length (mm) 100 100 100 / 100 100
Upper Protective Lens (mm) D25.4*T4 D25.4*T4 D25.4*T4-8 D25.4*T4
Lower Protective Lens (mm) D34*T5 D34*T5 D34*T5-8 D34*T5
Size (mm) 428.3×181 428.3×181 428.3×181 498×181
Weight (kg) ≈9.5 ≈9.5 ≈9.5 ≈12.5
Auto Focus Range (mm) ±50 ±50 ±50 ±50
Laser Wavelength (nm) 1030-1090 1030-1090 1030-1090 1030-1090
Cutting Gas (Bar) Φ10, max. 25bar Φ10, max. 25bar Φ10, max. 25bar Φ10, max. 25bar
Cooling Gas (Bar) Φ6, max. 5bar Φ6, max. 5bar Φ6, max. 5bar Φ6, max. 5bar
Cooling Water Φ8, max. 5bar, min. 2.0L/min Φ8, max. 5bar, min. 2.0L/min Φ8, max. 5bar, min. 2.0L/min Φ8, max. 5bar, min. 2.0L/min

 

BLT642H F200 (0-15kW)

BLT662H F200 (0-20kW)

BLT682H F200 / F300 (0-30kW)

Exceptional Product Attributes

  • Intelligent Piercing: Employs sensors to meticulously oversee the piercing procedure. Upon completion of the piercing, it promptly transitions to cutting, so saving superfluous waiting time and augmenting overall efficiency.
  • Anti-explosion Monitoring of Protective Lens: Continuously and in real-time, it checks the astigmatism value within the head's chamber. This proactive oversight safeguards the protecting lens and guarantees constant cutting quality.
  • Process Monitoring: The internal sensor of the cutting head facilitates real-time oversight of the cutting process. This allows operators to identify and resolve faults swiftly, guaranteeing seamless operation.
  • The cutting head's advanced anti-collision design markedly diminishes the likelihood of damage necessitating depot repairs. Furthermore, consumers may effortlessly replace damaged components themselves, eliminating the necessity for expert assistance and yielding significant reductions in maintenance expenses.

Thorough Product Specifications

  • Consistent and Efficient Cutting: The real-time in-head sensor is essential for attaining stable cutting performance. By identifying uncut routes, it autonomously commences a recut, guaranteeing that each incision is accurate and thorough.
  • Smart Piercing: The capability to oversee the piercing procedure in real-time facilitates prompt incision following the piercing. This fluid transition conserves precious time and enhances productivity.
  • Slag-Free Cutting: By continuously monitoring the laser beam, the cutting head may promptly deactivate the beam to ensure slag-free cutting without any interruptions. This yields cleaner cuts and superior quality end goods.
  • Effortless Maintenance: The optical drawer is operational, and the lens replacement requires about 5 minutes. This ease of maintenance not only conserves time but also minimizes repair expenses.
  • Dependable Safeguarding: Protective screws are used to safeguard the cutting head from any harm. This diminishes the probability of expensive depot repairs and operational interruptions.
  • Intelligent and Secure Processing: Oversees the gas pressure of the primary and secondary lower protective lenses and issues early alerts. This mitigates lens damage and guarantees a secure working environment.
  • The Protective Lens Monitor features an enhanced algorithm that integrates with the sensor to efficiently prevent the protective lens from fracturing due to contamination. This prolongs the lens's lifespan and preserves cutting efficacy.

In conclusion, the BOCI BLT6 Series smart laser cutting heads provide an optimal combination of sophisticated technology, dependability, and user-friendliness. These cutting heads are an optimal selection for both large-scale industrial production and precision cutting operations, catering to those in pursuit of high-performance solutions in the ultra-high power laser cutting domain.

Return & Refund

At PENDSTAR, we strive to ensure your complete satisfaction with every purchase. If you are not entirely happy with your order, we offer a straightforward return and refund process. Please review the following guidelines to understand how returns and refunds work.

1. How to Initiate a Return

The return process varies depending on your order status. Follow the steps below to initiate a return:

1.1 Order Placed but Not Shipped

  • Step 1: Email us at [info@pendstar.com] with your order number and reason for return.
  • Step 2: We will attempt to cancel your order and process a refund.
  • Important: Do not initiate a bank refund, as this may incur fees and delay the process.

1.2 Order Delivered

  • Step 1: Email us at [info@pendstar.com] to request a return authorization.
  • Step 2: Once approved, return the product to the address provided.
  • Note: You are responsible for return shipping costs and applicable service fees (see Section 2).

2. Return & Refund Conditions

To qualify for a return and refund, your product must meet the following conditions:

2.1 Eligibility

  • Returns must be initiated within 15 days of delivery.
  • Products must be in their original condition, including packaging and accessories.
  • A valid receipt or proof of purchase is required.

2.2 Service Fees

Service fees are applied based on the product condition and category. Fees are calculated as a percentage of the total order cost.

Product Condition Machine Accessories & Consumables
Not Packed, Not Shipped 4.4% 4.4%
Packaged, Not Shipped 10% 20%
Shipped, Unopened 20% 25%
Opened, Unused 30% 50%
Opened, Used 50% 80%

2.3 Important Notes

  • Laser Services: Non-refundable once delivered.
  • Stand-Alone Consumables: Not eligible for return.
  • Bank Charges: Any fees incurred during the refund process will be deducted.
  • No Exchanges: We do not offer product exchanges.

3. Refund Processing Timeline

To ensure a smooth refund process:

  • Include a packing list, order number, and customer name in the return package.
  • If returning the product yourself, email us the tracking number at [info@pendstar.com].

Once we receive the returned product:

  • Inspection: We will inspect the product within 3-5 business days.
  • Approval: If approved, you will receive a confirmation email.
  • Refund: Refunds are processed within 10-15 business days after approval.

Note: If you do not receive your refund after this period, contact your bank or card issuer.

4. Disclaimer

  • Approved Returns Only: We reserve the right to refuse returns that do not meet our policy requirements.
  • Return Address: Only returns sent to the address provided in your return confirmation email will be accepted.
  • No On-Site Returns: All returns must be mailed; we do not accept in-person returns.

5. Questions?

If you have any questions about our Return & Refund Policy, contact us at [info@pendstar.com]. We’re here to help!

Payment & Taxes

At PENDSTAR, we strive to make global purchasing seamless. Below are details about payment methods, shipping policies, and tax regulations for your region.

1. Accepted Payment Methods

We offer secure and flexible payment options:

1.1 PayPal & Credit Cards & Shopify Payment

  • ✅ PayPal: Instant processing with buyer protection.
  • ✅ Credit/Debit Cards: Visa, Mastercard, American Express.
  • ✅ Shopify Payment

If your payment is declined:

  1. Check spending limits: Contact your bank to confirm transaction approval.

  2. Fraud prevention: Our system may flag large transactions. Email [info@pendstar.com] immediately for assistance.

2. Customs Duties & Taxes

Taxes depend on your location and order value.

2.1 Orders Shipped from China

  • Responsibility: Import taxes/duties are regulated by your country’s laws.
  • Estimate Costs: Shipping rates are pre-calculated, but final taxes may vary.

  • Action Required: Contact local customs for exact fees.

2.2 Orders Shipped from US/DE/UK Warehouses

  • Tax-Inclusive Pricing: VAT is included in product prices.
  • No Additional Fees: No taxes due upon delivery.

2.3 Regional Tax Rules

Region Order Value Threshold Tax Policy
European Union ≤ €150 VAT collected at checkout. No fees upon delivery.
> €150 Import VAT + duties charged by local customs.
United Kingdom ≤ £135 VAT collected at checkout.
> £135 Import VAT + duties paid by recipient.
USA All orders No import taxes for orders under $800 (de minimis value). Higher values may incur duties.

3. Shipping Options & Delivery

3.1 Global Shipping

  • From China: 5-10 business days (DHL/FedEx).
  • From US/DE/UK: 2-5 business days.

3.2 Tracking & Support

  • Receive a tracking link via email once shipped.
  • Delays? Contact [info@pendstar.com] for real-time updates.

4. FAQ

Q: Can I cancel an order after payment?
A: Yes, email us within 24 hours. Orders in transit follow our Return Policy.

Q: Who pays import taxes for EU orders over €150?
A: You are responsible for fees charged by customs.

Q: How do I claim a VAT refund?
A: Submit a request to your local tax authority with the invoice we provide.

5. Contact Us

For shipping or tax questions:
📧 Email: [info@pendstar.com]
🌐 Live Chat: Available Mon-Fri, 9 AM - 5 PM (GMT+8).

What payment methods do you accept?

We accept payments via PayPal, bank transfer, Shopify Payment, and Visa card.

Can I cancel or change my order before it is shipped?

Yes, we accept cancellations and changes to your order as long as it has not been shipped yet. Please contact our customer service team for assistance.

Do you ship internationally?

Yes, we offer global shipping to most countries. Please check our shipping policy for any restrictions.

What's the returns policy?

You can find detailed information about our return and refund policy on our dedicated Return & Refund Policy.

Need help? Visit FAQs or Contact us now.