BOCI Laser Optical Protective Windows Protective Lens for Fiber Laser Head
There are many good things about BOCI laser cutting head glasses, such as the ones below:
In terms of optical performance:
- High accuracy in focusing: The laser beam can be narrowed down to make a high-density spot, which allows for very precise cutting. This lets it work very well with very small parts, intricate patterns, or materials that need to be cut with very high accuracy. To meet a wide range of difficult processing needs, it can cut very fine lines and shapes.
- Good optical path stability: The lens’s optical design and production process can keep the laser stable during transmission and lower optical path deviation and energy loss. This makes sure that laser cutting is stable and consistent, that each cut has a high effect, and that the quality and output of the products are better.
In terms of processing efficiency
- Fast response focusing: The response time for focussing is quick, so there is less time spent waiting for back and forth focussing. This makes the processing process more logical and greatly increases processing efficiency. For processing jobs that need to change the focal length a lot, this benefit is especially clear. It can quickly change to cut materials of different sizes, which speeds up the work.
- High cutting speed: The laser cutting head can cut very quickly because it has great optical performance and the lens efficiently transfers laser energy. To make sure the quality of the cuts, the amount of work that needs to be done per unit of time is raised. This helps businesses make their production more efficient and cut costs.
In terms of durability:
- Strong wear resistance: The glasses are very hard and don’t wear down easily because they are made from high-quality materials and use advanced coating technology. When used for a long time, it can stand up to laser wear, cutting debris, and environmental factors. It can also protect the lens from damage and wear, make it last longer, and lower the company’s repair costs and the number of times the lens needs to be replaced.
- Good high temperature resistance: A lot of heat will be made during the laser cutting process, and the lens needs to be able to handle this well for it to work properly. The cutting head’s wave-stimulated light lens can keep its optical performance stable in high-temperature areas. It won’t bend, break, or affect laser transmission when the temperature rises, so the cutting head is reliable and stable.
In terms of intelligent functions:
- Protective mirror temperature detection: The temperature of the protective mirror can be seen in real time, and an early warning can be sent out if it gets too hot. This helps workers find problems early on and take the right steps to keep the quality of the cuts from going down or the lens from getting damaged by the protective mirror getting too hot. It also makes the cutting head safer and more reliable.
- Air pressure monitoring: During the cutting process, it can keep an eye on the gas flow output in real time. This makes sure that too little or too much air pressure doesn’t affect the quality of the cut part. The cutting process can be made more stable and consistent, and the quality of the cuts can be raised by carefully watching and controlling the air pressure.
- Closed-loop monitoring: The cutting head has several sets of sensors built in that can automatically check on it in real time and in a closed loop. They can quickly figure out what’s wrong and give you an early warning. This lets workers know how the cutting head works and find problems before they happen. This way, maintenance and repairs can be done on time, cutting down on downtime and making better use of the equipment.
In terms of ease of use:
- Easy to install and replace: It makes sense that the lens is made the way it is, and it’s easy and quick to install and change. Installing and replacing lenses can be done quickly by operators, which cuts down on equipment repair time and boosts work output. There are also easy ways to install and replace parts, which lowers the technical requirements for operators and makes it easier for businesses to use and handle.
- Strong compatibility: Works with a lot of different laser cutting tools and lasers, so it can be used in a lot of different situations. It lets businesses pick the right wave stimulation laser cutting head lenses for their own tools when they use it. Large-scale changes and upgrades don’t need to be made to the equipment, which lowers the costs of investing in equipment for the business.
Reviews
There are no reviews yet.